MO-A6.1P.10

3D Printed Triply Periodic Minimal Surfaces Lattices for Shielding Applications at Microwaves

Matteo Bruno Lodi, Giacomo Muntoni, Andrea Melis, Alessandro Fanti, Giuseppe Mazzarella, University of Cagliari, Italy
Session:
Focused Session on : Advanced Materials and Manufacturing of Antennas and Microwave Components for Sensing and Communication Applications Oral
Track:
D: IoT and RFID antennas, circuits, and systems
Location:
Monumentale: 1-17
Session Time:
Mon, 15 Jul, 13:40 - 17:20
Presentation Time:
Mon, 15 Jul, 17:00 - 17:20
Session Co-Chairs:
Gaetano Marrocco, University of Rome Tor Vergata and Mohammad Zarifi, University of British Columbia
Presentation
Discussion
Session MO-A6.1P
MO-A6.1P.1: Using Electrically Small Electromagnetic Sources for Breast Cancer Detection in Low Frequencies
Ghazaleh Tashtarian, Hamid Akbari-Chelaresi, Mauricio Hernandez, University of Waterloo, Canada; Abdolali Abdipour, Ahad Tavakoli, Amirkabir University of Technology, Iran; Omar Ramahi, University of Waterloo, Canada
MO-A6.1P.2: An Additively Manufactured mm-Wave Foldable and Bend-Resilient Interconnect for Morphing RF
Nathan Wille, Hani Al Jamal, Manos Tentzeris, Georgia Institute of Technology, United States
MO-A6.1P.3: Uncommon Conductors and Dielectrics for Wearable Applications
Allyanna Rice, Asimina Kiourti, The Ohio State University, United States
MO-A6.1P.4: Recyclable Near-Field Chipless-RFID Tags with High Data Capacity and Density
Ferran Paredes, Amir Karami-Horestani, Universitat Autonoma de Barcelona, Spain; Sandra Pérez, Eloi Ramon, Institut de Microelectrònica de Barcelona (IMB-CNM-CSIC), Spain; Ferran Martín, Universitat Autonoma de Barcelona, Spain
MO-A6.1P.5: Upper-Bound Performance of Laser-Induced Graphene (LIG) Antennas on PEEK for Implantable Applications
Federica Naccarata, Alessio Mostaccio, Joanna Filippi, Eugenio Martinelli, Gaetano Marrocco, University of Rome Tor Vergata, Italy
MO-A6.1P.6: A Wearable Flexible Loop Antenna for In-Body Beamforming
Uzay Bengi, Bogazici University, Turkey; Katjana Krhoc, University of Zagreb, Croatia (Hrvatska); Kamran Sayrafian, Information Technology Laboratory National Institute of Standards & Technology, United States; Sema Dumanli, Bogazici University, Turkey
MO-A6.1P.7: Temperature-Sensitive Microstrip Patch Antenna Radiation using Large-Area Artificially-Engineered Carbon-Loaded Composites
Mahmoud Wagih, University of Glasgow, United Kingdom; Junjie Shi, Menglong Li, University of Southampton, United Kingdom; Thomas Whittaker, William G. Whittow, Loughborough University, United Kingdom; Steve Beeby, University of Southampton, United Kingdom
MO-A6.1P.8: RF Transparent Coatings for Conformal Circuits
Lucas Unger, Christopher Molinari, Bradley Pothier, University of Massachusetts Lowell, United States; Gary Walsh, U.S. Army, United States; Corey Shemelya, University of Massachusetts Lowell, United States
MO-A6.1P.9: FDM/FFF printed dielectric farfield lens antenna using Cyclic Olefin Copolymer filament
Niklas Muckermann, Mohamed Abdelmaksoud, Justin Romstadt, Manuel Funk, Jan Barowski, Nils Pohl, Ruhr University Bochum, Germany
MO-A6.1P.10: 3D Printed Triply Periodic Minimal Surfaces Lattices for Shielding Applications at Microwaves
Matteo Bruno Lodi, Giacomo Muntoni, Andrea Melis, Alessandro Fanti, Giuseppe Mazzarella, University of Cagliari, Italy
Resources
View Manuscript