MO-A6.1P: Focused Session on : Advanced Materials and Manufacturing of Antennas and Microwave Components for Sensing and Communication Applications
Mon, 15 Jul, 13:40 - 17:20
Location: Room 4
Session Chair: Mohammad Zarifi, University of British Columbia
Track: D: IoT and RFID antennas, circuits, and systems
Mon, 15 Jul, 13:40 - 14:00

MO-A6.1P.1: Using Electrically Small Electromagnetic Sources for Breast Cancer Detection in Low Frequencies
Ghazaleh Tashtarian, Hamid Akbari-Chelaresi, Mauricio Hernandez, University of Waterloo, Canada; Abdolali Abdipour, Ahad Tavakoli, Amirkabir University of Technology, Iran; Omar Ramahi, University of Waterloo, Canada
Mon, 15 Jul, 14:00 - 14:20

MO-A6.1P.2: An Additively Manufactured mm-Wave Foldable and Bend-Resilient Interconnect for Morphing RF
Nathan Wille, Hani Al Jamal, Manos Tentzeris, Georgia Institute of Technology, United States
Mon, 15 Jul, 14:20 - 14:40

MO-A6.1P.3: Uncommon Conductors and Dielectrics for Wearable Applications
Allyanna Rice, Asimina Kiourti, The Ohio State University, United States
Mon, 15 Jul, 14:40 - 15:00

MO-A6.1P.4: Recyclable Near-Field Chipless-RFID Tags with High Data Capacity and Density
Ferran Paredes, Amir Karami-Horestani, Universitat Autonoma de Barcelona, Spain; Sandra Pérez, Eloi Ramon, Institut de Microelectrònica de Barcelona (IMB-CNM-CSIC), Spain; Ferran Martín, Universitat Autonoma de Barcelona, Spain
Mon, 15 Jul, 15:00 - 15:20

MO-A6.1P.5: Upper-Bound Performance of Laser-Induced Graphene (LIG) Antennas on PEEK for Implantable Applications
Federica Naccarata, Alessio Mostaccio, Joanna Filippi, Eugenio Martinelli, Gaetano Marrocco, University of Rome Tor Vergata, Italy
Coffee Break
Mon, 15 Jul, 15:40 - 16:00

MO-A6.1P.6: A Wearable Flexible Loop Antenna for In-Body Beamforming
Uzay Bengi, Bogazici University, Turkey; Katjana Krhoc, University of Zagreb, Croatia (Hrvatska); Kamran Sayrafian, Information Technology Laboratory National Institute of Standards & Technology, United States; Sema Dumanli, Bogazici University, Turkey
Mon, 15 Jul, 16:00 - 16:20

MO-A6.1P.7: Temperature-Sensitive Microstrip Patch Antenna Radiation using Large-Area Artificially-Engineered Carbon-Loaded Composites
Mahmoud Wagih, University of Glasgow, United Kingdom; Junjie Shi, Menglong Li, University of Southampton, United Kingdom; Thomas Whittaker, William G. Whittow, Loughborough University, United Kingdom; Steve Beeby, University of Southampton, United Kingdom
Mon, 15 Jul, 16:20 - 16:40

MO-A6.1P.8: RF Transparent Coatings for Conformal Circuits
Lucas Unger, Christopher Molinari, Bradley Pothier, University of Massachusetts Lowell, United States; Gary Walsh, U.S. Army, United States; Corey Shemelya, University of Massachusetts Lowell, United States
Mon, 15 Jul, 16:40 - 17:00

MO-A6.1P.9: FDM/FFF printed dielectric farfield lens antenna using Cyclic Olefin Copolymer filament
Niklas Muckermann, Mohamed Abdelmaksoud, Justin Romstadt, Manuel Funk, Jan Barowski, Nils Pohl, Ruhr University Bochum, Germany
Mon, 15 Jul, 17:00 - 17:20

MO-A6.1P.10: 3D Printed Triply Periodic Minimal Surfaces Lattices for Shielding Applications at Microwaves
Matteo Bruno Lodi, Giacomo Muntoni, Andrea Melis, Alessandro Fanti, Giuseppe Mazzarella, University of Cagliari, Italy