MO-A6.2P: Additive Manufacturing of Antennas and Components
Mon, 15 Jul, 13:40 - 17:20
Location: Spadolini: 1-05
Session Type: Oral
Session Chair: Manos Tentzeris, Georgia Institute of Technology
Track: AP-S: Antenna Applications and Emerging Technologies
Mon, 15 Jul, 14:00 - 14:20

MO-A6.2P.2: Achieving Omnidirectional Dual-Polarized Sensing with Additively Manufactured Antennas
Isaiah Pisani, Dejan Filipović, University of Colorado Antenna Research Group, United States
Mon, 15 Jul, 14:20 - 14:40

MO-A6.2P.3: Miniaturized Top-Metalized 3D-printed Rectangular Dielectric Resonator Antenna
Francisco Javier Herraiz-Martínez, Universidad Pontificia Comillas, Spain; Mario Pérez-Escribano, Telecommunication Research Institute (TELMA), Universidad de Málaga, Spain; Paris Sofokleous, Universidad Pontificia Comillas, Spain; Pablo Padilla, Research Centre for Information and Communication Technologies (CITIC-UGR), University of Granada, Spain; Enrique Márquez-Segura, Telecommunication Research Institute (TELMA), Universidad de Málaga, Spain
Mon, 15 Jul, 14:40 - 15:00

MO-A6.2P.4: Ku-Band Patch Antenna on Thick, Aerosol Jet Printed Substrate
Lucas Hendershot, Matt Hodek, Prem Chahal, John Albrecht, John Papapolymerou, Michigan State University, United States
Mon, 15 Jul, 15:00 - 15:20

MO-A6.2P.5: Additive Manufactured Gap Waveguide Based Antenna for Difference Radiation Pattern in Ka-Band
Sergio M. Feito, Alvaro F. Vaquero, Manuel Arrebola, Universidad de Oviedo, Spain
Coffee Break
Mon, 15 Jul, 15:40 - 16:00

MO-A6.2P.6: Inexpensive 3D Printable High Gain Dielectric Rod Antenna for mm-Wave Applications
Farooq Faisal, Abdelkader Zerfaine, Mohamed Chaker, Tarek Djerafi, National Institute of Scientific Research (INRS), Canada
Mon, 15 Jul, 16:00 - 16:20

MO-A6.2P.7: FDM 3D-Printed DRA Array for 5G Millimeter Wave and 6G Applications
Siyu Li, Benito Sanz Izquierdo, University of Kent, United Kingdom; Steven Gao, Chinese University of Hong Kong, China; Zhijiao Chen, Beijing University of Posts and Telecommunications, China
Mon, 15 Jul, 16:20 - 16:40

MO-A6.2P.8: 3D-Printed Conformal Meta-Lens with Multi-mode Orbital Angular Momentum (OAM) Generation and Beam-steering Capabilities
Noureddine Melouki, Fahad Ahmed, Peyman PourMohammadi, Tayeb A. Denidni, INRS-EMT, Université du Québec, Canada
Mon, 15 Jul, 16:40 - 17:00

MO-A6.2P.9: Additive Manufacturing-Enabled Chipless Tags for Anti-Counterfeiting Solutions
Suvadeep Choudhury, Filippo Costa, Giuliano Manara, Simone Genovesi, University of Pisa, Italy
Mon, 15 Jul, 17:00 - 17:20

MO-A6.2P.10: On the Feasibility of a 3D-printable Conductive Filament-based Antenna Array for Conformal Applications
Hemachandra Konduru, Benjamin Callies, Dipankar Mitra, University of Wisconsin-La Crosse, United States; Sayan Roy, University of Missouri-Kansas City, United States; Shuvashis Dey, North Dakota State University, United States; Rahul Gomes, University of Wisconsin-Eau Claire, United States