TU-A6.3A.3

Aerosol Jet-Printed Sensors on Doubly-Curved Multilayer Laminates

Christopher Molinari, Michelle Conolly, Basil Vanderbie, Corey Shemelya, University of Massachusetts Lowell, United States
Session:
Additive manufacturing antennas for sensing and communications Oral
Track:
AP-S: Antenna Applications and Emerging Technologies
Location:
Spadolini: 1-05
Session Time:
Tue, 16 Jul, 08:40 - 12:20
Presentation Time:
Tue, 16 Jul, 09:20 - 09:40
Session Co-Chairs:
Yen-Sheng Chen, National Taipei University of Technology and Corey Shemelya, University of Massachusetts Lowell
Presentation
Discussion
Session TU-A6.3A
TU-A6.3A.1: Design and Fabrication of Inkjet-Printing Transparent Transmitarrays
Han Chang, Fei-Peng Lai, Yen-Sheng Chen, National Taipei University of Technology, Taiwan
TU-A6.3A.2: A Novel Miniaturized Conformal Antenna for Bluetooth-enabled Hearing-Aid Devices
Jing Lin Jiang, Yu Fang, Mei Song Tong, Tongji University, China
TU-A6.3A.3: Aerosol Jet-Printed Sensors on Doubly-Curved Multilayer Laminates
Christopher Molinari, Michelle Conolly, Basil Vanderbie, Corey Shemelya, University of Massachusetts Lowell, United States
TU-A6.3A.4: Additive Manufacturing Exploitation for Wireless Sensing and Radio Frequency Identification
Daniela Gasperini, Armin Gharibi, Sandra Rodini, Suvadeep Choudhury, Filippo Costa, Giuliano Manara, Simone Genovesi, University of Pisa, Italy
TU-A6.3A.5: Analysis of shaped 3D-Printable dielectric lens antennas based on generalized superformula
Alberto Facchini, Politecnico di Bari, Italy; Francesco Paolo Chietera, Università del Salento, Italy; Riccardo Colella, CNR, Italy; Luca Catarinucci, Università del Salento, Italy; Pietro Bia, Elettronica SpA, Italy; Luciano Mescia, Politecnico di Bari, Italy
TU-A6.3A.7: High Power Waveguide-fed Helical Antenna for Broadband Applications
Jori Platt, Dejan Filipovic, University of Colorado Boulder, United States
TU-A6.3A.8: Design and Characterization of Different Unit Cells for the Implementation of 3D-printed Lenses
Jose Alvarez-Vidal, Pontificia Universidad Católica de Valparaíso, Chile; Philip Lambert, 3D Fortify, Inc, United States; Francisco Pizarro, Pontificia Universidad Católica de Valparaíso, Chile
TU-A6.3A.9: Ultrawideband Metallic 3D-Printed Antenna Based on Spoof Surface Plasmon Polariton
Yongsheng Pan, Yuandan Dong, University of Electronic Science and Technology of China, China
TU-A6.3A.10: Additively Manufactured Ultra-wideband Cavity-backed Stacked Patch Antenna for 5G mmWave Conformal Phased Array Systems
Kexin Hu, Manos Tentzeris, Georgia Institute of Technology, United States
Resources
View Manuscript