TU-A6.3A: Additive manufacturing antennas for sensing and communications
Tue, 16 Jul, 08:40 - 12:20
Location: Spadolini: 1-05
Session Type: Oral
Session Co-Chairs: Yen-Sheng Chen, National Taipei University of Technology and Corey Shemelya, University of Massachusetts Lowell
Track: AP-S: Antenna Applications and Emerging Technologies
Tue, 16 Jul, 08:40 - 09:00

TU-A6.3A.1: Design and Fabrication of Inkjet-Printing Transparent Transmitarrays
Han Chang, Fei-Peng Lai, Yen-Sheng Chen, National Taipei University of Technology, Taiwan
Tue, 16 Jul, 09:00 - 09:20

TU-A6.3A.2: A Novel Miniaturized Conformal Antenna for Bluetooth-enabled Hearing-Aid Devices
Jing Lin Jiang, Yu Fang, Mei Song Tong, Tongji University, China
Tue, 16 Jul, 09:20 - 09:40

TU-A6.3A.3: Aerosol Jet-Printed Sensors on Doubly-Curved Multilayer Laminates
Christopher Molinari, Michelle Conolly, Basil Vanderbie, Corey Shemelya, University of Massachusetts Lowell, United States
Tue, 16 Jul, 09:40 - 10:00

TU-A6.3A.4: Additive Manufacturing Exploitation for Wireless Sensing and Radio Frequency Identification
Daniela Gasperini, Armin Gharibi, Sandra Rodini, Suvadeep Choudhury, Filippo Costa, Giuliano Manara, Simone Genovesi, University of Pisa, Italy
Tue, 16 Jul, 10:00 - 10:20

TU-A6.3A.5: Analysis of shaped 3D-Printable dielectric lens antennas based on generalized superformula
Alberto Facchini, Politecnico di Bari, Italy; Francesco Paolo Chietera, Università del Salento, Italy; Riccardo Colella, CNR, Italy; Luca Catarinucci, Università del Salento, Italy; Pietro Bia, Elettronica SpA, Italy; Luciano Mescia, Politecnico di Bari, Italy
Tue, 16 Jul, 11:00 - 11:20

TU-A6.3A.7: High Power Waveguide-fed Helical Antenna for Broadband Applications
Jori Platt, Dejan Filipovic, University of Colorado Boulder, United States
Tue, 16 Jul, 11:20 - 11:40

TU-A6.3A.8: Design and Characterization of Different Unit Cells for the Implementation of 3D-printed Lenses
Jose Alvarez-Vidal, Pontificia Universidad Católica de Valparaíso, Chile; Philip Lambert, 3D Fortify, Inc, United States; Francisco Pizarro, Pontificia Universidad Católica de Valparaíso, Chile
Tue, 16 Jul, 11:40 - 12:00

TU-A6.3A.9: Ultrawideband Metallic 3D-Printed Antenna Based on Spoof Surface Plasmon Polariton
Yongsheng Pan, Yuandan Dong, University of Electronic Science and Technology of China, China
Tue, 16 Jul, 12:00 - 12:20

TU-A6.3A.10: Additively Manufactured Ultra-wideband Cavity-backed Stacked Patch Antenna for 5G mmWave Conformal Phased Array Systems
Kexin Hu, Manos Tentzeris, Georgia Institute of Technology, United States